Accepted altos 1.8.6-1 (source amd64) into unstable
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Sun, 05 Aug 2018 11:25:17 +0800
Source: altos
Binary: altos
Architecture: source amd64
Version: 1.8.6-1
Distribution: unstable
Urgency: medium
Maintainer: Bdale Garbee <bdale@gag.com>
Changed-By: Bdale Garbee <bdale@gag.com>
Description:
altos - Altus Metrum firmware and utilities
Changes:
altos (1.8.6-1) unstable; urgency=medium
.
[ Bdale Garbee ]
* add a paragraph to the intro pointing to the altusmetrum email list
* another second seems to help on the very slow Acer laptop
* add a warning about Google limiting per-day access until/unless we pay
* altos/fox: rename fox product
* move signal that forces flash-loader on to PB8, active high
* had the sense backwards .. presence of 'attached' should put us in the loader
* add a turnon script for TeleLCO v2.0
* add telefireeight-v1.0 to products built by default in src/Makefile
* releasing 1.8.6
.
[ Keith Packard ]
* altos/ao_cc1120: Only call ao_packet_slave_stop when HAS_SLAVE
* altos: Hack up code for TeleMetrum to make it just a tracker
* micropeak: Make reported 'max height' value show filtered max height
* altosdroid: Attempt to avoid some reported altosdroid crashes
* doc: add release check for altusmetrum-docinfo.xml copyright
* altos/stm: Simplify ao_usb_write a bit
* altos: Use max of 64 previous orient values when checking pyro limits
* altos/flash-loader: On STM, don't include ao_usb_disable
* Set version to 1.8.5.1
* altoslib: Clarify terms in Mega pyro config
* altoslib: Remove ascending/descending from pyro config
* altoslib: Flush settings restoration commands after accel cal
* altoslib: Keep config data accel cal in antenna up form.
* altoslib: Fix data fetching during flashing of cc1111-based devices
* altos/fox: Add fox1ihu bringup firmware
* altos/fox: Initialize FOX adc
* altos/fox: Fix up Fox ADC bits
* altos/fox: Provide names for fox ADC channels
* altos/fox: Turn on all of the fox lights
* altos/fox: Add watchdog timer
* altos/fox: Enable M25 driver for MRAM.
* altos/fox: Add MRAM and SD card drivers
* altos/fox: Add fox1ihu flash loader
* altos/fox: Run app when PD6 is low
* altos/fox: update product name to show v2, enable watchdog by default
* altos/fox: Transition to current altos build environment
* altos/fox: Update ADC to fox-1 IHU Revision 2
* altos/fox: Enable system timer in flash loader and prod watchdog with it
* altos: Build fox1ihu by default
* Remove ao_radio_cal from stm products without radios
* altos/fox1ihu: Pull down radio control pin in flash loader
* altoslib: Fix Idle Monitor on TeleMega v3
* altos/stmf0: Change tests for AO_BOOT_CHAIN and AO_BOOT_PIN to #if
* altos/stmf0: whitespace fix
* altos/stmf0: Set 0x0 mapping to Main Flash for boot loader
* ao-bringup/turnon_telemini: Skip DFU if no DFU device is present
* altos/kernel: Define usb IN2/IN3 functions
* altos/kernel: Add USB descriptors for IN3
* altos/stmf0: Toggle IN2 SW_BUF bit when sending data
* altos/stmf0: Add IN3 alternate endpoint support
* altos/stmf0: Fix up USB debug code
* altos/chaoskey-v1.0: Add endpoint for reading flash contents
* ao-chaosread: Add support for the new flash endpoint in chaoskey
* Update version to 1.8.5.2
* altos: Eliminate height requirement for coast detect
* altos/test: Replace state name with 10* state value in test log. Fix raw speed
* doc: Update pyro channel info to reflect UI changes
* altos: Add µPusb v3.0 project
* altos/stmf0: leave ao_power_gpio names undefined without power management
* altos/mpusb-v3.0: Make it compile again
* altos: add 'vidtime', a simple brightness monitor
* altos/vidtime: Check for value change in normal code, not irq
* altos: Add TeleLCO v2.0 product
* altos/stm: Add per-LED port/pin mode in LED code
* altos/drivers: Pads with multi-port firing and pad selector DIP switch
* altos: Add TeleFireEight v1.0 product
* altos/telelco-v2: Change select button to alternate box/pad mode
* altos/ao_button.c: Support up to 16 buttons
* altos/telelco-v2.0: Only switch encoder mode on push, not release
* altos/drivers: Make quadrature debounce longer by default. Fix state tracking
* altos/telelco-v2.0: Reduce quadrature debounce time
* altos/driver: Add support for one-step-per-click quadrature encoder
* altos/telelco-v2.0: Use single-step quadrature code
* altos/telelco-v2.0: Only look at drag select presses, not releases
* altos/telelco-v2.0: Mixed up the select_button pin (is E0, was set to E13)
* altos/telelco-v2.0: Fix button names and pin mappings. Add drag LED.
* altos/telelco-v2.0: A bit fancier with the drag-mode LED show
* altos/telelco-v2.0: Add debug output for pad voltage display
* altos/telelco-v2.0: Change drag race selected/no-continutity pattern
* altos/stm: Add polling ADC sampler API
* altos/telelco-v2.0: Display local batt voltage at startup
* altos/stm: Enable HSI timer when HAS_ADC_SINGLE is set
* altos/telelco-v2.0: Set HAS_ADC_SINGLE to enable HSI timer
* altoslib: Revert field name changes for accel cal values
* altos/telefireeight-v1.0: Fix ADC definitions
* altos/telefire*: Do voltage tests in decivolts instead of ADC units
* altos/telelco-v2.0: Test displays at power on
* altos/telelco: Remove STATIC_TEST code from stand-alone LCO boxes
* altos/stm: Remove unused ADC names from ao_adc_single_stm.c
* altos/stm: Define ADC channels for TEMP and V_REF
* ao-bringup: Find dfu-util in $PATH for chaoskey
* altos/telelco-v0: Test display, show batt voltage at boot
* altos/driver: Improve quadrature debouncing for mechanical encoders
* altos/telelco-v0.2-cc1200: Add build for NAR hacked TeleLCO v0.2 board
* altos/telelco-v2.0: Fix AO_ADC_DUMP
* Bump version to 1.8.6
* altos/stm: Let products override AO_LED_TYPE for stm processors
* altos/ao_pad: Use AO_LED_TYPE for computing active LEDs.
* altos/ao_pad: Turn on all LEDs for a moment at power up
* altos/ao_pad: Move LED test to the monitor task
* altos/telelco-v2.0: Do all drag race beeping from the beeping thread
* altosuilib: Split cc1111 vs arm telefire/telemini for flashing
* altos/test: Compute and show height error tracker in ao_flight_test
* altos: Share common LCO functions in ao_lco_bits.c
* altos: Build telelco-v2.0 by default
* altos: A bit more LCO code sharing
* altos: Fix telelcotwo build for new ao_lco_bits.c file
* altos: Fix LCO display while searching
* altos: Make LCO search directly drive pad/box displays
* altos: Make fewer LCO variables public
* altos: Fetch current quadrature status at startup time
* altoslib: Make stop_remote delay depend on the data rate
* ao-tools/ao-dumplog: Dump entire eeprom contents
* altos: Change 'after motor' pyro check to be >= instead of ==
* altos/stm-demo: Set up for dumping eeprom
* altos/plottest: Make linewidth bigger
* altos: Add separate 'ao_launch_tick'. Use in pyro and lockout.
* Update docs for 1.8.6
Checksums-Sha1:
3ef956717c6ce0bcaec7ad16f7a6c5a429bc55e5 2187 altos_1.8.6-1.dsc
c0ef35e903fdb717b8c1d9585b5e85062f5599f1 36953852 altos_1.8.6.orig.tar.gz
1b58076ee0ad505f1fadc50573a6a372389d1a91 69896 altos_1.8.6-1.debian.tar.xz
e139cabc2007c355d85911e7c80153e6157551ae 311248 altos-dbgsym_1.8.6-1_amd64.deb
626f28a220904d12b9e3332ed552ca4af0b71980 13671 altos_1.8.6-1_amd64.buildinfo
43316272fb054dde20bb0b5b85ff87d14a417960 26397756 altos_1.8.6-1_amd64.deb
Checksums-Sha256:
dd118cefef0d77ae3265d4d7ff229534e5ebac4094a0b792d63342919b44ca0c 2187 altos_1.8.6-1.dsc
c20d2046416dfded6647f44708f9d5ce7d6decb5afc7610c420e7fed7d2e278b 36953852 altos_1.8.6.orig.tar.gz
d7a3ae3e13605348e0b748a56e257c08873ebded71f77153c0719725c2caf79a 69896 altos_1.8.6-1.debian.tar.xz
eed54f6247b36345a1500c1b576b73536a79cba64d261ba98ddf02f8de2e313b 311248 altos-dbgsym_1.8.6-1_amd64.deb
4b1483645f0b5b1e1c1955fd93edb8e90332b42175cf7c8f03da14f54bc35cea 13671 altos_1.8.6-1_amd64.buildinfo
9451c0741b2d7f248584b9ddbed09d218f3d14b2079977a41001ab8186b88a8f 26397756 altos_1.8.6-1_amd64.deb
Files:
6665392a1549cbd50c8c5704a855cbf3 2187 electronics optional altos_1.8.6-1.dsc
3510cc2e9a454626e1d8296e91f6fa25 36953852 electronics optional altos_1.8.6.orig.tar.gz
5efad60a97abcd63bccc1ed0c955a887 69896 electronics optional altos_1.8.6-1.debian.tar.xz
ccb97fe090555990926b6dd36d60dc4e 311248 debug optional altos-dbgsym_1.8.6-1_amd64.deb
f558b296736b5aace5813f1c2d6331aa 13671 electronics optional altos_1.8.6-1_amd64.buildinfo
1f49cc65f4e64b72a32a464e1b535db4 26397756 electronics optional altos_1.8.6-1_amd64.deb
-----BEGIN PGP SIGNATURE-----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=7BEz
-----END PGP SIGNATURE-----