-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Wed, 17 Apr 2024 09:02:58 +0200
Source: snapd
Architecture: source
Version: 2.62-1
Distribution: unstable
Urgency: medium
Maintainer: Michael Hudson-Doyle <mwhudson@debian.org>
Changed-By: Zygmunt Krynicki <me@zygoon.pl>
Changes:
snapd (2.62-1) unstable; urgency=medium
.
[ Ernest Lotter ]
* New upstream release, LP: #2058277
- Aspects based configuration schema support (experimental)
- Refresh app awareness support for UI (experimental)
- Support for user daemons by introducing new control switches
--user/--system/--users for service start/stop/restart
(experimental)
- Add AppArmor prompting experimental flag (feature currently
unsupported)
- Installation of local snap components of type test
- Packaging of components with snap pack
- Expose experimental features supported/enabled in snapd REST API
endpoint /v2/system-info
- Support creating and removing recovery systems for use by factory
reset
- Enable API route for creating and removing recovery systems using
/v2/systems with action create and /v2/systems/{label} with action
remove
- Lift requirements for fde-setup hook for single boot install
- Enable single reboot gadget update for UC20+
- Allow core to be removed on classic systems
- Support for remodeling on hybrid systems
- Install desktop files on Ubuntu Core and update after snapd
upgrade
- Upgrade sandbox features to account for cgroup v2 device filtering
- Support snaps to manage their own cgroups
- Add support for AppArmor 4.0 unconfined profile mode
- Add AppArmor based read access to /etc/default/keyboard
- Upgrade to squashfuse 0.5.0
- Support useradd utility to enable removing Perl dependency for
UC24+
- Support for recovery-chooser to use console-conf snap
- Add support for --uid/--gid using strace-static
- Add support for notices (from pebble) and expose via the snapd
REST API endpoints /v2/notices and /v2/notice
- Add polkit authentication for snapd REST API endpoints
/v2/snaps/{snap}/conf and /v2/apps
- Add refresh-inhibit field to snapd REST API endpoint /v2/snaps
- Add refresh-inhibited select query to REST API endpoint /v2/snaps
- Take into account validation sets during remodeling
- Improve offline remodeling to use installed revisions of snaps to
fulfill the remodel revision requirement
- Add rpi configuration option sdtv_mode
- When snapd snap is not installed, pin policy ABI to 4.0 or 3.0 if
present on host
- Fix gadget zero-sized disk mapping caused by not ignoring zero
sized storage traits
- Fix gadget install case where size of existing partition was not
correctly taken into account
- Fix trying to unmount early kernel mount if it does not exist
- Fix restarting mount units on snapd start
- Fix call to udev in preseed mode
- Fix to ensure always setting up the device cgroup for base bare
and core24+
- Fix not copying data from newly set homedirs on revision change
- Fix leaving behind empty snap home directories after snap is
removed (resulting in broken symlink)
- Fix to avoid using libzstd from host by adding to snapd snap
- Fix autorefresh to correctly handle forever refresh hold
- Fix username regex allowed for system-user assertion to not allow
'+'
- Fix incorrect application icon for notification after autorefresh
completion
- Fix to restart mount units when changed
- Fix to support AppArmor running under incus
- Fix case of snap-update-ns dropping synthetic mounts due to
failure to match desired mount dependencies
- Fix parsing of base snap version to enable pre-seeding of Ubuntu
Core Desktop
- Fix packaging and tests for various distributions
- Add remoteproc interface to allow developers to interact with
Remote Processor Framework which enables snaps to load firmware to
ARM Cortex microcontrollers
- Add kernel-control interface to enable controlling the kernel
firmware search path
- Add nfs-mount interface to allow mounting of NFS shares
- Add ros-opt-data interface to allow snaps to access the host
/opt/ros/ paths
- Add snap-refresh-observe interface that provides refresh-app-
awareness clients access to relevant snapd API endpoints
- steam-support interface: generalize Pressure Vessel root paths and
allow access to driver information, features and container
versions
- steam-support interface: make implicit on Ubuntu Core Desktop
- desktop interface: improved support for Ubuntu Core Desktop and
limit autoconnection to implicit slots
- cups-control interface: make autoconnect depend on presence of
cupsd on host to ensure it works on classic systems
- opengl interface: allow read access to /usr/share/nvidia
- personal-files interface: extend to support automatic creation of
missing parent directories in write paths
- network-control interface: allow creating /run/resolveconf
- network-setup-control and network-setup-observe interfaces: allow
busctl bind as required for systemd 254+
- libvirt interface: allow r/w access to /run/libvirt/libvirt-sock-
ro and read access to /var/lib/libvirt/dnsmasq/**
- fwupd interface: allow access to IMPI devices (including locking
of device nodes), sysfs attributes needed by amdgpu and the COD
capsule update directory
- uio interface: allow configuring UIO drivers from userspace
libraries
- serial-port interface: add support for NXP Layerscape SoC
- lxd-support interface: add attribute enable-unconfined-mode to
require LXD to opt-in to run unconfined
- block-devices interface: add support for ZFS volumes
- system-packages-doc interface: add support for reading jquery and
sphinx documentation
- system-packages-doc interface: workaround to prevent autoconnect
failure for snaps using base bare
- microceph-support interface: allow more types of block devices to
be added as an OSD
- mount-observe interface: allow read access to
/proc/{pid}/task/{tid}/mounts and proc/{pid}/task/{tid}/mountinfo
- polkit interface: changed to not be implicit on core because
installing policy files is not possible
- upower-observe interface: allow stats refresh
- gpg-public-keys interface: allow creating lock file for certain
gpg operations
- shutdown interface: allow access to SetRebootParameter method
- media-control interface: allow device file locking
- u2f-devices interface: support for Trustkey G310H, JaCarta U2F,
Kensington VeriMark Guard, RSA DS100, Google Titan v2
Checksums-Sha1:
6a0500062404662bc9736a8a905254eebd0c8564 3461 snapd_2.62-1.dsc
483c76ebf73e5b1aa53925a484933f32472d6f71 12732311 snapd_2.62.orig.tar.gz
552b7ea4988cb79d699ab8d198668cf93f4f6cd8 136104 snapd_2.62-1.debian.tar.xz
279265e081b09c21e7b39cce8aea6c33d721c8ea 14700 snapd_2.62-1_source.buildinfo
Checksums-Sha256:
d203647d8aa43dff94606adb4c1dbcd3c586343b96fed6c28858c6c2a6b9e31f 3461 snapd_2.62-1.dsc
41d7506639994cdad2789614f15f4baf3dee52d27269b10e69ee7012e4777a41 12732311 snapd_2.62.orig.tar.gz
7dc7952cd3cdd3c8b3ca1e1cf122713788182824b849a67ea43613f3687ac8b4 136104 snapd_2.62-1.debian.tar.xz
ccbae420fbed1000667435b4fa859be7e42a67fa38bd7fb4a809f556bbfc5f4f 14700 snapd_2.62-1_source.buildinfo
Files:
a565ba3753c678de10b4a4f89ddf004e 3461 devel optional snapd_2.62-1.dsc
64d0f7091bdff8d3d1cba718bc6e7264 12732311 devel optional snapd_2.62.orig.tar.gz
d8e743e062be2bb4a54c6aaaa16a71e0 136104 devel optional snapd_2.62-1.debian.tar.xz
26d31f4572d0b34b3834fe552835300e 14700 devel optional snapd_2.62-1_source.buildinfo
-----BEGIN PGP SIGNATURE-----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=oy6Y
-----END PGP SIGNATURE-----
Attachment:
pgpbuv_b7B5x4.pgp
Description: PGP signature